Sale!
6959 8999
  • 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices
  • 【LONG REACH POE TRANSMISSION】Up to 100Mbps in 300m (1000ft) RG59 cable transmission, max 1000m (3000ft) distance in 10Mbps, working with CCA/CCU RG59/RG6 cable. Support POE power transmission with load capacity 11W over 300m (1000ft) transmission, working with POE IP camera, VoIP phone, POE WiFi AP
  • 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight
  • 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable, so as being used with twist pair. EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices
  • 【24/7 US LOCAL + GLOBAL TECH SUPPORT】This product comes with 1-year warranty, 24/7 Life-time US LOCAL + GLOBAL Tech Support. Free system consultant service. Just feel free to contact us here. Ready and willing to help in anytime
  • EOC Converter Introduction (3.3MB)
    SKU: EOC-Converter (Receiver+Transmitter)
    POE IP Over Coax Converter banner
    EOC (Ethernet Over Coax, also known as IP over Coax) Converter is used to transmit Video & Audio & Data over existing coaxial cables.Features with
    POE & IP data transmission, LINOVISION EOC converter is designed to upgrade traditional analogue video surveillance system to IP surveillance
    system without replacing coaxial cables. It is working with POE IP cameras, POE Wi-Fi AP, VoIP phones, etc.
    Linovision EOC Unique Features


    Unique Features compared with other products in the market

    • POE + IP Data transmission over Coaxial cable, perfect for IP CCTV system.
    • Industrial design, with built-in heat sink, ensure super reliability and hassle-free transmission.
    • Up to 100Mbps in 300m (1000ft) RG59 cable transmission, max 1000m (3000ft) distance in 10Mbps.

    2021 Updated Version

    The 2021 version EOC converter supports POE IP data transmission over twist pair cable, such as Cat5E/Cat6 cable, power line, RS485 cable, etc.
    BNC to Twist pair connectors are required in this connection. This function is widely used in elevator application.

    Outstanding Features:

    • IP Video & Audio & Data & POE Power transmission over coaxial cable.
    • Passive design, no power adapter is required.
    • Max 1000 meters (3000ft) transmission.
    • Upto 100Mbps bandwidth over 1,000 feet regular coax cable transmission, working with CCA/CCU RG59/RG6 cable.
    • Plug-and-play, configuration free.
    • Small size (3.1“x2.0”x0.9“), light weight, fit into regular cameraback box.
    • Compatible to IEEE802.3af/IEEE802.3at POE protocol, max 21W POE load capacity in 100m (330ft) , or 11W POE load capacity in 300m (1000ft).
    • Optional water-proof box for outdoor use.
    • Working with POE IP Cameras, POE Wi-Fi AP, VoIP phone, etc.
    • 1 * RJ45 port:10/100Mbps, MDI/MDIX self-adaption; 1 * BNC RG59 coaxial.

    EOC Connection Diagram
    EOC Transmission Performance form

    EOC Transmission Performance

    • This chart of transmission performance is based on regular RG59 coaxial cable and powered by standard DC48V POE injectors.
    • The performance will be better when using RG6 cable or DC53V POE injectors.
    • This EOC transmitter and receiver can transmit up to 100Mbps network data and load max 11W POE device in 300 meters (or 1,000ft).
    • The network bandwidth will be automatically lowered to 10Mbs over 1,000ft and the max transmission distance is 3,280ft. This bandwidth is still sufficient for single 4K IP camera.

    Application 1
    EOC Application for single IP Camera
    • Upgrade traditional analogue system to IP surveillance system while using existing coaxial cable(RG59 cable)
    Application 2
    EOC Application for VoIP Phone; WiFi AP
    • Remote power & network transmission for VoIP phone, WiFi AP (POE enabled) over coaxial cable
    Application 3
    EOC Application in Elevator
    • Transmit POE power and IP data over coaxial or twist pair cable. One passive EOC-transmitter will be put inside the elevator cart to feed camera or signal board, and one EOC-receiver will be in the control room, powered by POE switch/POE injector/POE NVR.
    • For multiple elevators application, one EOC-Switch04 or EOC-Switch24 will be put in the control room, working together with max 8 elevators.

    EOC Package included

    Package includes:

    • 1 * EOC Transmitter
    • 1 * EOC Receiver
    • 1 * User’s Manual
    • 2 * Pack of installation screws
    • 2 * BNC to Twist Pair Connector

    FAQ

    Q: Why my POE device is offline when working with our EOC (IP Over Coax) Converter?

    A: Several main reasons are as follow:

    1. Because of reverse connection. EOC transmitter should be connected to POE device (IPC/VoIP), and EOC receiver is connected to POE supply device (POE NVR, POE Switch or POE Injector).

    2. It is used for point-to-point coax cable direct connection ONLY, no BNC repeater/T-connect/splitter in the middle.

    3. Because of insufficient load capacity. The maximum load capacity is 21W in 300ft transmission which is sufficient to power a regular IP PTZ camera. The load capacity can be at least 11W in 1000ft transmission which is sufficient to power most of IP cameras or VoIP phones.

    4. Because of no power supply. Please be informed that EOC receiver has to be connected to an POE NVR, POE Switch or POE Injector to be powered.

    You may also like